EasyManua.ls Logo

Epson Stylus Pro 10600 - Code Page

Epson Stylus Pro 10600
312 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-73
Note:
When the Sheet light is on, the Print Page Line setting is not available.
INTERFACE
When AUTO is selected, the printer automatically switches
between interfaces depending on which one is receiving data first.
If no more print jobs have been received, the printer returns to an
idle state after 10 seconds or more. You can also select the interface
from parallel, USB, option1, or 2.
CODE PAGE
Select the code page from PC437 and PC850.
ROLL MARG
Select margins for roll paper from 3 mm, 15 mm, and T/B 15 mm.
Note:
The combination of Top/Bottom = 3 mm, Left/Right = 15 mm is not
selectable.
Roll Cutter Off light Print Page Line Printers Operation
On On Prints page lines on the right
side and below the
document.
On Off Does not print page lines nor
cut.
Margin settings Top/Bottom Left/Right
3 mm 3 mm 3 mm
15 mm 15 mm 15 mm
T/B 15 mm 15 mm 3 mm

Table of Contents

Other manuals for Epson Stylus Pro 10600

Related product manuals