-74
When the same image is printed with a 3 mm margin and a 15
mm margin and compared, you may notice that part of the right
side of the 15 mm margin image is not printed.
PAPER SIZE CHK
When you select ON, the printer stops printing and RELOAD PAPER
appears on the printer’s control panel when the paper width
loaded in the printer does not match the image width. When OFF
is selected, the printer continues to print even if the paper width
does not match the images and the printer may print off of paper.
PAPER ALIGN CHK
When OFF is selected, paper align error does not occur even if the
printed image is out of range of the paper so that the printer can
continue the print job.
When ON is selected, PAPER NOT STRAIGHT is displayed on the LCD
panel and the printer stops printing.
INIT. SETUP
Sets all setting values you have made in the PRINTER SETTING
MENU to their factory set value.
Area to be
Clipped
15mm
Right
15mm
Left
Printable area
Leading edge
Bottom
15mm
Print direction
Roll paper
Top
15mm
To Next Page
Loading...
