-75
TEST PRINT MENU
This menu contains the following items.
NOZZLE CHECK
Prints the nozzle check pattern for six colors. From the printing
results, you can check for missing dots. Also, the firmware version
is printed. For details, see “Printing a nozzle check pattern”.
You can perform nozzle check pattern printing using the utility.
STATUS CHECK
Prints the current SelecType status. For details, see “Printing a
status sheet”.
JOB INFO
Prints the job information saved in the printer (up to 10 jobs).
PRINTER STATUS MENU
This menu contains the following items.
VER
Shows the firmware version.
JOB HISTORY
Displays the print jobs saved in the printer. Ink consumption (INK)
is displayed in ml, paper consumption (PAPER) in m
2
, and the time
required for the print job (PRINT TIME) in seconds. The latest job
is saved as No.0.
CLR JOB HSTRY
Clears the job history in the printer.
To Next Page
Loading...
