-79
CUT PRESSURE
Set the cutter pressure (0 to 100%) for cutting paper. Lower the
pressure to cut weaker paper.
CUT METHOD
Specifies the cutting method. There are two ways to cut paper (3
STEP and 4 STEP). Select 4 STEP for cutting weaker or thicker
paper.
PPR FEED ADJ
Sets the paper feed amount. The range is -1.00 to 1.00%.
DRYING TIME
Sets the ink drying time per print head pass. The range is 0 to 10
seconds.
SUCTION
Sets the suction pressure for feeding the printed-paper. If you use
a thin paper, such as film, select WEAK or WEAKEST.
PRINT ADJSTMENT
Adjusts the MicroWeave mode. The setting range is 1 to 9.
Increase the value to give priority to the printing speed. Decrease
it to give priority to the print quality.
MAINTENANCE MENU
This menu contains the following items.
BK INK CHANGE
Enables you to replace black ink cartridges for the most desirable
printing. See “Replacing Black Ink Cartridges” for the details.
To Next Page
Loading...
