-87
2. In SelecType mode, press the SelecType button until TEST
PRINT MENU is displayed on the LCD panel.
3. Press the Item button to display NOZZLE CHECK.
4. Press the Enter button.
The nozzle check pattern is printed as shown below. After
printing, the printer exits the SelecType mode and returns to
the READY status.
Nozzle check pattern examples:
If you find that any segments are missing from the test lines in the
pattern, you need to clean the print heads. Press the Cleaning
button on the control panel for more than 3 seconds or access the
Head Cleaning utility from the EPSON printer utilities in your
software. See “Using the Printer Utilities” for Windows or “Using
the Printer Utilities” for Macintosh.
c
Caution:
Before you start printing images, make sure that the nozzle check
pattern printing is complete. Otherwise, print quality may
decline.
good
head cleaning necessary
To Next Page
Loading...
