Epson Stylus Pro 3800 - Page 147

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 147
10. Open the GUIDE, PAPER GUIDE, BOARD PAPER, RIGHT inward, and remove
the LINK, EJ, RIGHT and the GUIDE, PAPER GUIDE, BOARD PAPER,
RIGHT from the pivot of the FRAME, PAPER, EJECT, ASSY. See Figure 4-72.
11. Push in the FRAME, PAPER, EJECT, ASSY to the end, and release the
TORSION SPRING, 0.046 secured to the both ends of FRAME, PAPER, EJECT,
ASSY. See Figure 4-73.
Figure 4-72. Removing the LINK, EJ, RIGHT and GUIDE, PAPER GUIDE, BOARD
PAPER, RIGHT
Figure 4-73. Releasing the TORSION SPRING, 0.046
pivot of the FRAME,
PAPER, EJECT, ASSY
GUIDE, PAPER GUIDE, BOARD PAPER, RIGHT
LINK, EJ, RIGHT
TORSION SPRING, 0.046
Left Side
Right Side
TORSION SPRING, 0.046