Epson Stylus Pro 3800 - Page 168

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 168
7. Carry out step 4. of the “4.3.10.2 TIMING BELT, PF” (p185), and remove the two
screws of the HOUSING, LOWER.
8. Lift up the left side of the main frame, and remove the PRESSURE, PUMP,
ASSY., from the main frame.
See Figure 4-99.
Figure 4-99. Removing the PRESSURE, PUMP, ASSY.
When installing the PRESSURE, PUMP, ASSY, be sure to insert
the hook and rib on the PRESSURE, PUMP, ASSY. into the
positioning holes on the main frame.
PRESSURE, PUMP, ASSY.
rib
hook
Positioning points
HOUSING, LOWER
PRESSURE, PUMP, ASSY.