Epson Stylus Pro 3800 - Page 174

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 174
5. Secure the MOUNTING PLATE, SELECT, INK with the screw.
 One C.B.P. 2.5 x 8 screw (3±1 kgf.cm)
6. Attach the both hooks of the EXTENSION SPRING, 5.63 to the hooked tabs one
each on the CARRIAGE, ASSY and LEAF SPRING, LOCK, HEAD.
Figure 4-108. Installing the MOUNTING PLATE, SELECT, INK
Figure 4-109. Attaching the EXTENSION SPRING, 5.63
Insert the rib of the PRINT HEAD into the cutout of the
MOUNTING PLATE, SELECT, INK to secure the MOUNTING
PLATE, SELECT, INK.
Attach the EXTENSION SPRING, 5.63 so that its both ends face
toward the other side of the CARRIAGE, ASSY..
NG
OK
End
EXTENSION SPRING, 5.63
C.B.P. 2.5x8
MOUNTING PLATE, SELECT, INK
Positioning point
EXTENSION SPRING, 5.63
LEAF SPRING, LOCK, HEAD
Hooked tabs
CARRIAGE, ASSY