Problem Solver 156
EPSON Stylus Pro 3800 User’s Guide
For paper other than Epson’s, register and select paper thickness in Menu mode. Make
sure it is correct for the paper you are using. See “Making the paper settings” on page
113.
❏ Set the PLATEN GAP to WIDE in the PRINTER SETTING of Menu mode. See “PRINTER
SETUP” on page 103.
Printouts are curled when they are ejected
If the printouts are curled on the output tray, remove the paper before the next sheet of
paper is ejected.
Print Quality Could be Better
Click the caption under the illustration that best resembles your printout.
If you are having print quality problems, try the solutions offered here.
“Horizontal banding” on page 157 “Vertical misalignment or banding”
on page 157
“Color documents print in black
only” on page 159
“Faint printout or gaps” on page 157
“Blurry or smeared printout” on
page 158
To Next Page
Loading...
