Problem Solver 159
EPSON Stylus Pro 3800 User’s Guide
Color documents print in black only
Try one or more of these solutions:
❏ Make sure the color data settings in your application are correct.
❏ For Windows, make sure Color is set in the Main menu. See “Making Settings on the
Main Menu” on page 14.
For Mac OS X, make sure Color is set in the Print Settings selected in the Print dialog.
See “Color” on page 76.
Printing could be faster
Try one or more of these solutions:
❏ Select High Speed on the Advanced dialog box. For Windows, see “Making Advanced
setting” on page 19. For Mac OS X, see “Advanced Settings” on page 79.
❏ For Windows, select the Automatic mode and move the slider towards Speed in the
Main menu to increase print speed. See “Making Settings on the Main Menu” on page
14.
For Mac OS X, select Automatic mode and move the slider towards Speed in the Print
Settings selected in the Print dialog to increase print speed. See “Mode” on page 76.
❏ Do not run too many applications at the same time. Close any applications you are not
using.
❏ Change the interface card of your computer to USB 2.0.
Note:
USB 2.0 are available only with the following OS.
USB 2.0:
Windows XP x64, XP, or 2000
❏ Delete unnecessary files to make room on your hard disk drive.
Note for Windows:
Your computer may not have enough memory. For further tips, see “Increasing the Print Speed”
on page 58.
To Next Page
Loading...
