Printing with Mac OS X 87
EPSON Stylus Pro 3800 User’s Guide
Performing Borderless Printing
When selecting the paper size with Sheet Feeder - Borderless (Auto Expand), Sheet
Feeder - Borderless (Retain Size), Manual-Rear - Borderless (Auto Expand), or
Manual- Rear - Borderless (Retain Size) as the Paper Size in the Page Setup dialog,
Epson recommends the following media conditions.
Accommodate media width:
Note:
❏ If your application has margin settings, make sure they are set to zero before printing.
❏ The ink may contaminate the platen of the printer. In this case, wipe the ink away using a cloth.
❏ Printing with this feature takes longer time than normal printing.
❏ Smear may result in the top and bottom areas depending on the media.
❏ Borderless printing is not supported when the PAPER SIZE CHECK setting is off. Make sure
that ON is selected for PAPER SIZE CHECK on the printer’ s control panel.
❏ Letter (8.5 × 11 in)
❏ US B (11 × 17 in)
❏ US C (17 × 22 in)
❏ A4 (210 × 297 mm)
❏ A3 (297 × 420 mm)
❏ Super A3 (329 × 483 mm)
❏ A2 (420 × 594 mm)
❏ 89 × 127 mm (3.5 × 5 in)
❏ 102 × 152 mm (4 × 6 in)
❏ 127 × 178 mm (5 × 7 in)
❏ 16:9 wide size (102 × 181 mm)
❏ 203 × 254 mm (8 × 10 in)
❏ 254 × 305 mm (10 × 12 in)
❏ 279 × 356 mm (11 × 14 in)
❏ 406 × 508 mm (16 × 20 in)
To Next Page
Loading...
