Epson Stylus Pro 3850 - Check Ink Selector Operation

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Standard Adjustment 262
5.3.22 Check Ink Selector Operation
 Purpose
Checks if the Ink Selector functions normally or not.
 Procedure
1. Remove the HOUSING, UPPER.
2. Remove the COVER, CR.
3. Attach the OPERATION, PANEL, ASSY to the printer and connect the FFC
cable.
4. Turn the printer ON.
5. Start up the Adjustment Program and select [Check Ink Selector Operation].
6. Select [MK] or [PK] and then click [Run].
Referring to Figure 5-77, visually check if the ink selector works normally or
not.
7. Click [Finish].
Figure 5-76. [Check Ink Selector Operation] Screen
Figure 5-77. Ink Selector Switching Operation
C H E C K
P O I N T
When removing the HOUSING, UPPER, do not remove the LOCK,
COVER, ASSY. Keep the ink cover closed and turn the ink cover
open sensor ON.
INK-SLCT_01
Photo Black Matte Black