Epson Stylus Pro 3850 - 4.1.6 Note on the compatibility of parts

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Overview 90
4.1.6 Note on the compatibility of parts
The incompatible parts of Epson Stylus Pro 3800/3800C/3850 and Epson Stylus Pro 3880/3885/3890 are indicated below.
Note : MOTOR ASSY.,CR,CS is the part name for Epson Stylus Pro 3800/3800C/3850. The part name for Epson Stylus Pro 3880/3885/3890 is MOTOR ASSY.,CR,ASP.
C A U T I O N
The following parts are incompatible with each model. If the following parts are installed accidentally to the other model, the printer performance might be
affected. Because these parts have no difference in appearance and it is difficult to visually distinguish them. Besides, they can be attached on the other
model. Therefore, make sure to confirm the parts codes carefully, then order the appropriate parts and replace them with the parts to repair.
Table 4-3. Incompatible parts
Parts Name
Parts Code
Reference
Epson Stylus Pro
Reference 3800/
Epson Stylus Pro
Reference 3800C
Epson Stylus Pro
Reference 3850
Epson Stylus Pro
Reference 3880
Epson Stylus Pro
Reference 3885
Epson Stylus Pro
Reference 3890
BOARD ASSY.,MAIN 2117028 2117029 2128952 2128953 2128954 p113
MOTOR ASSY.,CR,CS* 2113738 1520869 p123
INK,SYSTEM,ASSY.,ESL,ASP 1451573 1518586 p153
PRINT HEAD F177000 F196000 p161