3. Open the top cover and then use a soft, clean cloth to carefully remove any dust or dirt inside
the printer. If the back of a printout is soiled, carefully clean the rib (the light magenta part)
using a soft, clean cloth by following the directions of the arrows.
4. If the problem still occurs, clean it using a soft, clean cloth dampened with mild detergent.
Then, wipe the inside of the printer dry with a dry, soft cloth.
5. If the outer case is dirty, clean it using a soft, clean cloth dampened with mild detergent. You
should keep the ink compartment covers closed to prevent water from getting inside.
Epson Stylus Pro 3880 User’s Guide
Maintenance and Transportation 173
To Next Page
Loading...
