Epson Stylus Pro 4000 - Page 94

Stylus Pro 4000 Field Repair Guide 4/28/05
Pump and Cap Removal Printer Component, Software Item, LCD Display, Printer Button Page 94.
4. Flex the Trigger Shaft until the end farthest from the Side Frame clears it’s Socket, then remove
the Shaft.
5. Remove 4 Screws securing the Cap and Pump Assembly.
Flex the Shaft from
behind
Free the end of the
Shaft from it’s
Socket
Slide out the Trigger
Shaft
2 Screws
2 Screws