1-36
36 | Handling Paper and Other Media
7. Move the paper lever to the secured position. The printer automatically
positions the paper for printing.
8. Raise the roll paper support. Make sure the paper is on top of the guides.
9. Close the roll paper cover.
To avoid indenting or creasing the paper, remove it from the paper path and
roll it up when you are not printing.
Note: The maximum
length of roll paper you
can print on is limited by
the printer driver, and
may also be limited by
your application software
and/or operating system.
sp4000Guide.book Page 36 Friday, October 22, 2004 5:06 PM
To Next Page
Loading...
