4-97
Maintaining and Transporting the Printer | 97
•
Windows XP: Click Start and select Control Panel. Double-click
Printers and Other Hardware, then double-click Printers and
Faxes
. Right-click your printer icon and select Printing
Preferences. Click the Utility tab.
• Other versions of Windows: Click Start, point to Settings, then
select
Printers. Right-click your printer icon and select Properties
(Windows 98 or Me),
Document Defaults (Windows NT), or
Printing Preferences (Windows 2000). Click the Utility tab.
You see a screen like the following:
3. Click the
Nozzle Check icon.
4. Click
Auto and follow the instructions on the screen.
The nozzle check pattern is printed and automatically read. If the
printer finds clogged nozzles, it runs a cleaning cycle.
sp4000Guide.book Page 97 Friday, October 22, 2004 5:06 PM
To Next Page
Loading...
