Epson Stylus Pro 4000 - Page 23

23
Setting Up Client Systems | 23
10. Select the ColorBurst RIP print server name that you specified (see
“Setting the Print Server Name” on page 13) from the list of
Rendezvous printers.
11. Select
ColorBurst RIP Server from the Printer Model list.
12. Highlight
ColorBurst - EPSON StylusPro4000.
13. Click
Add to add the printer.
You see the ColorBurst RIP Print Server name in the printer list.
14. Close Print Center or the Printer Setup Utility. You’re ready to print to
the ColorBurst RIP.
ColorBurst.book Page 23 Thursday, September 9, 2004 12:41 PM