Printing with Mac OS X 213
3
3
3
3
3
3
3
3
3
3
3
3
English
❏ When printing on cut-sheet media, only the left and right margins
are set to zero.
❏ The ink may contaminate the platen of the printer. In this case, wipe
the ink away using a cloth.
❏ Printing with this feature takes longer time than normal printing.
❏ Only Plain Paper and Plain Paper (line drawing) can set the bottom
margin to 3 mm. When printing on the other media, the bottom
margin is always 14 mm.
❏ When Premium Glossy Photo Paper (250) roll paper or Premium
Semigloss Photo Paper (250) roll paper is used in printing, the top
margin is always 20 mm.
❏ Smear may result in the top and bottom areas depending on the
media.
To perform borderless printing, follow the steps below.
Note:
Always match the Format for setting in the Page Setup dialog with the
Printer setting in the Print dialog; otherwise, data may not be printed
correctly.
1. Select the paper size with Borderless (Auto Expand),
Borderless (Auto Expand, Maximum), Borderless (Retain
Size), Borderless (Retain Size, Maximum), Roll Paper -
Borderless (Auto Expand), Roll Paper - Borderless (Retain
Size), or Roll Paper - Borderless Banner as the Paper Size in
the Page Setup dialog.
2. Make the Auto Cut setting. See “Auto Cut” on page 205.
3. Click OK.
4. Start printing your data from your application.
To Next Page
Loading...
