The Control Panel 237
4
4
4
4
4
4
4
4
4
4
4
4
English
INTERFACE
You can select an interface to receive your print data. When you
select AUTO, the printer automatically switches between interfaces,
depending on which one is receiving data first. When you select
USB, IEEE1394, or OPTION, only the selected interface receives your
print data. If no more print job is received, the printer returns to
an idle state after 10 seconds or more.
CODE PAGE
You can select a code page: PC437 (extended graphics) or PC850
(multilingual).
PAPER MARGIN
You can select margins for roll paper: T/B 15 mm, T/B 35 mm,
15 mm, or 3mm.
When the same data is printed with a 3 mm margin and a 15 mm
margin and compared, you may notice that part of the right side
of the 15 mm margin image is not printed.
Margin settings Top Bottom Left/Right
T/B 15 mm 15 mm 15 mm 3 mm
T/B 35 mm 35 mm 35 mm 3 mm
15 mm 15 mm 15 mm 15 mm
3mm 3 mm 3 mm 3 mm
Area to be
Clipped
15mm
Right
15mm
Left
Printable area
Leading edge
Bottom
15mm
Print direction
Roll paper
Top
15mm
To Next Page
Loading...
