Maintenance Mode 261
5
5
5
5
5
5
5
5
5
5
5
5
English
3. Press the Menu button to set the language. Confirm that
the READY (or similar word in the language selected) appears
on the LCD.
Note:
It takes a while until READY (or similar word in the language selected)
appears.
PAPER COUNTER
You can select a paper remaining counter function. When this
function is on, ROLL COUNTER or SHEET COUNTER appears on the
PRINTER SETUP menu.
1. In the maintenance mode, press the Paper Feed or Paper
Feed button to display PAPER COUTNER, and then press the
Menu
button.
2. Press the Paper Feed or Paper Feed button to select a
suitable function.
3. Press the Menu
button.
UNITS
You can select the units for displaying length. To select the units,
follow the steps below.
Note:
This item is available only when you choose ENGLISH in LANGUAGE.
1. In maintenance mode, press the Paper Feed or Paper
Feed button to display UNITS, and press the Menu
button.
2. Press the Paper Feed or Paper Feed button to select a
suitable unit.
3. Press the Menu
button to set the units.
To Next Page
Loading...
