Printing with Windows 61
1
1
1
1
1
1
1
1
1
1
1
1
English
Auto Rotate
Note:
This function is available only when Roll Paper is selected as the Paper
Source setting.
This function is effective only when the print data length is shorter
than the printable width of the roll paper. The print data will
automatically be turned 90 degrees to print crosswise, saving roll
paper.
To enable this function, follow the steps below.
1. Select Auto Rotate. The Roll Width button is activated.
2. Click Roll Width. The Roll Paper Width dialog box appears.
3. Select the installed roll paper size from the pull-down menu.
4. Click OK.
Original Auto Rotate onAuto Rotate off
To Next Page
Loading...
