Epson Stylus Pro 4400 - Page 307

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 307
7. Remove the screw securing "Installation Plate, I/H Guide, C" and remove
"Installation Plate, I/H Guide, C".
 C.B.S. 3x6: 1 pc.
Figure 4-140. Installation Plate, I/H Guide, C Removal
 The shapes of "Installation Plate, I/H Guide, B" and
"Installation Plate, I/H Guide, C" differ, so be careful
when installing them.
 Align "Installation Plate, I/H Guide, B" and "Installation
Plate, I/H Guide, C" dowels (2 each) with frame
positioning holes (2 each).
(Refer to Figure 4-139 and 4-140.)
Installation Plate, I/H Guide, C Installation Plate, I/H Guide, B
Dowels and Positioning Holes
Installation Plate,
I/H Guide, C
C.B.S. 3x6