Epson Stylus Pro 4400 - Page 369

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Overview 369
Cleaning Unit 1 Reset When Cleaning Unit Change { --- P.443
Print Head 1 CR Timing Belt Tension Adjustment {{P.376
2 CR Encoder Sensor Position
Adjustment
{{P.382
3 Cleaning { --- P.412
4 Head Rank ID { --- P.388
5 Check Nozzle { --- P.436
6 Check Alignment {{P.437
7 Nozzle Bi-D Adjustment {{P.393
8 Printhead Slant Adjustment (PF) { --- P.394
9PG Adjustment { --- P.383
10 Nozzle Bi-D Adjustment {{P.393
11 Printhead Slant Adjustment (PF) { --- P.394
12 Printhead Slant Adjustment (CR) { --- P.397
13 Auto Uni-d Adjustment { --- P.401
14 Auto Bi-d Adjustment { --- P.430
15 Manual Bi-D {{P.431
16 Image Adjustment {{ *3
17 Colorimetric Calibration (Color ID) { --- P.414
18 Reset When Printhead Change { --- P.442
Table 5-2. Required Adjustment Items/Execution Order
Name Adjustment Item RP
*1
RM
*2
Ref.
Damper 1 Ink Discharge {{P.411
2 CR Timing Belt Tension Adjustment {{P.376
3 CR Encoder Sensor Position
Adjustment
{{P.382
4 Initial Ink Charge {{P.412
5 Head Rank ID { --- P.388
6 Check Nozzle {{P.436
7 Check Alignment {{P.437
8 Nozzle Bi-D Adjustment {{P.393
9 Print Head Slant Adjustment (PF) { --- P.394
10 PG Adjustment {{P.383
11 Nozzle Bi-D Adjustment {{P.393
12 Printhead Slant Adjustment (PF) { --- P.394
13 Printhead Slant Adjustment (CR) { --- P.397
14 Auto Uni-d Adjustment { --- P.401
15 Auto Bi-d Adjustment { --- P.430
16 Manual Bi-D {{P.431
17 Image Adjustment {{ *3
AS Mechanical
Unit
1 NVRAM Back Up and Write { --- P.409
2 Destination Setting { --- P.434
ASF Unit 1 Reset ASF Counter { --- P.442
Motor Assy., CR 1 CR Timing Belt Tension Adjustment {{P.376
2 Nozzle Bi-D Adjustment {{P.393
3 T&B&S (Roll Paper) {{P.390
4 T&B&S (Cut Sheet) {{P.391
5 Platen Position Adjustment {{P.405
6 Auto Uni-d Adjustment {{P.401
7 Auto Bi-d Adjustment {{P.430
8 Reset When CR Unit Change { --- P.442
Table 5-2. Required Adjustment Items/Execution Order
Name Adjustment Item RP
*1
RM
*2
Ref.