Epson Stylus Pro 4400 - Cam, Inclination, R and Cam, Inclination, L; Carriage

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Maintenance Lubrication 455
Figure 6-15. Carriage, A;B Right Side
Figure 6-16. Carriage, A;B Right Side
Figure 6-17. Carriage
Figure 6-18. "CAM, INCLINATION, R" and "CAM, INCLINATION, L"
• Lubrication Point
Both side surfaces of "Shaft,
Connection" (2 places) and "Carriage,
A;B Right Side" (5 places)
• Lubrication Type
G-26
• Lubrication Amount
1. Φ1mm x 1mm(2 places)
2. Φ1mm x 2mm(2 places)
3. Φ1mm x 2mm
4. Φ1mm
5. Φ1mm
•Remarks
Use a syringe/needle (JIS 17# or
equivalent) for application.
• Lubrication Point
Both side surfaces of "Shaft,
Connection" (2 places) and "Carriage,
A;B Right Side" (5 places)
• Lubrication Type
G-26
• Lubrication Amount
1. Φ1mm x 1mm(2places)
2. Φ1mm x 2mm(2places)
3. Φ1mm x 2mm
4. Φ1mm
5. Φ1mm
•Remarks
Use a syringe/needle (JIS 17# or
equivalent) for application.
3
2
1
Applys on both side
surfaces of the holder
4
5
Applys on both side
surfaces of the holder
5
4
3
1
2
• Lubrication Point
Upper part of Ribs of "Carriage" (4
places, lubrication point:
approximately 12mm)
• Lubrication Type
G-74
• Remarks
Use a brush or cotton swab for
application.
• Lubrication Point
Rising surfaces of "CAM,
INCLINATION, R" and "CAM,
INCLINATION, L"
• Lubrication Type
G-74
• Remarks
Use a brush or cotton swab for
application.