Epson Stylus Pro 4400 - Page 487

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Appendix Parts List 487
NON FIG CODE TYPE MICROPHONE(U-505)
NON FIG MULTI SENSOR POSITION TOOL
NON FIG PAPER THICKNESS POSITION TOOL
NON FIG CR LOCK TOOL
NON FIG Banding Standard Sample
NON FIG HEAD EXCHANGE SUPPORT TOOL
NON FIG CR SHAFT PARALLELISM PRSS TOOL
NON FIG CR SUS PLATE SUPPORT TOOL
NON FIG FFC CHECKING TOOL
NON FIG P-COVER OPEN SENSOR CLOSE TOOL
NON FIG THICKNESS GAUGE T=0.75
NON FIG THICKNESS GAUGE T=0.65
NON FIG KEEP STAND CR SHAFT HEIGHT TOOL
NON FIG PG BELT TENSION SUPPORT TOOL
NON FIG PG GUAR POSITION ADJ.TOOL
NON FIG PG BELT TENSION WEIGHT
NON FIG CR SHAFT PARALLELISM ADG.TOOL
NON FIG CR SHAFT PASS/UN-PASS TOOL
NON FIG CR SHAFT PARALLELISM WEIGHT
NON FIG CUTTER HEIGHT ADJUSTMENT TOOL
NON FIG CUTTER PRESS DOWN TOOL
NON FIG PLATEN HEIGHT ADGUSTMENT TOOL
NON FIG CR SHAFT HEIGHT ADGUSTMENT TOOL
NON FIG CR SHAFT HEIGHT CHECK TOOL
NON FIG PF ROLLER HEIGHT ADJ.TOOL
NON FIG PLATEN RUBBER SETTING TOOL
NON FIG ALLEN WRENCH(3mm)
NON FIG CR ASSY HOLD TOOL
NON FIG CUTTER CAP
NON FIG PRESS TOOL FOR CUTTER PLATE
NON FIG ASF EXCHANGE SUPPORT TOOL
NON FIG BOXWRENCH(SPECIAL PROCESSING)
NON FIG CUTTER PLATE DITCH POSITION TOOL
NON FIG KEEP STAND FOR CUTTER PLATE&PLATEN
NON FIG CALIBRATE BLOCK&TOOL STAND
Table 7-9. Stylus Pro 4400
Figure Part Name
NON FIG TENSION GAUGE(5N;STD)
NON FIG TENSION GAUGE(10N)
NON FIG THICKNESS GAUGE t=0.1mm
NON FIG TORQUE SCREWDRIVER(4~12KG)
NON FIG GREASE G74
Table 7-9. Stylus Pro 4400
Figure Part Name