Epson Stylus Pro 4450 - Page 194

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Troubleshooting Troubleshooting Based on Panel Messages 194
SERVICE REQ. 10000180
 Error meaning:
CPU reserve command code exception error
 Cause of trouble
 Defective circuit board
 Faulty CPU soldering
 Program trouble
 Generation error
 Remedy
1. Installing Firmware (p.444)
2. Replace the C593 MAIN Board (p.226)
SERVICE REQ. 100001A0
 Error meaning:
CPU slot illegal command exception error
 Cause of trouble
 Faulty CPU soldering
 Program trouble
 Generation error
 Remedy
1. Installing Firmware (p.444)
2. Replace the C593 MAIN Board (p.226)
SERVICE REQ. 100001C0
 Error meaning:
AC disruption
 Cause of trouble
 Power outage (=Instant blackout)
 Unplugged from electric outlet
 Power Supply Board failure
 MAIN Board failure.
 Remedy
1. Turn the power OFF, remove and insert the grounded electrical outlet
firmly, and turn the power back ON again.
2. Replace the Power Supply Board (p233)
3. Replace the C593 MAIN Board (p.226)
SERVICE REQ. 100005C0
 Error meaning:
CPU DMA address error
 Cause of trouble
 Defective circuit board
 Faulty CPU soldering
 Program trouble
 Generation error
 Remedy
1. Installing Firmware (p.444)
2. Replace the C593 MAIN Board (p.226)