The Control Panel 185
15. DRYING TIME appears. Press the Paper Feed or Paper
Feed button to select the time in seconds, and then press
the Menu
button.
16. SUCTION appears. Press the Paper Feed or Paper Feed
button to select STANDARD, -1, -2, -3, or -4.
17. M/W ADJ appears. Press the Paper Feed or Paper Feed
button to adjust MicroWeave. Increase the value to give
priority to the print speed, or decrease it to give priority to the
print quality.
18. Press the Menu
button to save the selected value.
Selecting the registered settings
To select the registered settings, follow the steps below.
1. Press the Menu
button to enter Menu mode.
2. Press the Paper Feed or Paper Feed button to display
CUSTOM PAPER, and then press the Menu
button.
3. Press the Paper Feed or Paper Feed button to display
PAPER NUMBER, and then press the Menu
button.
4. Press the Paper Feed or Paper Feed button to select
the number registered that you want to use. If you select
STANDARD, the printer prints data according to the driver
settings. If you select No. X, the control panel settings override
the driver settings.
5. Press the Menu
button. If you select No. X, the number
you selected appears on the LCD panel.
6. Press the Pause
button to exit Menu mode.
To Next Page
Loading...
