Epson Stylus Pro 4900 - Page 132

Error messages What to do
No Front Cover
Attach front cover then restart
printer.
Turn off the printer, then install the front cover. Reinstall the device correctly and then turn
on the printer. Installing the front cover U “Replacing the Cutter” on page 124
No Ink Cartridges
Install ink cartridge(s).
Install ink cartridges.
U “Replacing Ink Cartridges” on page 120
No Maintenance Box 1
Install maintenance box 1.
Install Maintenance Box 1 correctly.
U “Replacing Maintenance Box 1” on page 121
No Maintenance Box 2
Install maintenance box 2.
Install Maintenance Box 2 correctly.
U “Replacing Maintenance Box 2” on page 122
No Paper Cassette
Install paper cassette.
Install paper cassette.
U “Loading the Paper Cassette” on page 35
No Rear Unit
Install the rear unit.
Install the rear unit. For details on how to install the rear unit, refer to the "Cut sheets from
the paper cassette have jammed while printing" section that follows.
U “Feeding or ejecting problems” on page 146
Not Enough Empty Space
Replace the maintenance box 1.
Replace Maintenance Box 1 with a new one.
The on-screen message reads Maintenance Box 1, however the product name for this
consumable is Maintenance Box.
U “Replacing Maintenance Box 1” on page 121
Nozzle Clog Detected
Not enough empty space in maint
box 1.
Continue cleaning?
Yes (recommended)
No
If you select Yes, the Maintenance Box 1 replacement message is displayed. Replace the
Maintenance Box with a new one to continue cleaning.
U “Replacing Maintenance Box 1” on page 121
If you select No, cleaning is canceled and it returns to a ready status.
Nozzle Clog Detected
Not enough ink.
Continue cleaning?
Yes (Recommended)
No
If you select Yes, the ink cartridge replacement message is displayed. Replace the ink
cartridge with a new one to continue cleaning.
U “Replacing Ink Cartridges” on page 120
If you select No, cleaning is canceled and it returns to a ready status.
Paper Cut Error
Remove uncut paper.
Roll paper is not cut correctly. Press the Y button to release the paper presser and then
remove the uncut paper.
U “Feeding or ejecting problems” on page 146
Replace the cutter if the blade is blunt.
U “Replacing the Cutter” on page 124
Paper Eject Error
Press the Y button.
Press the Y button to rewind the roll paper.
U “Removing the roll paper” on page 32
Paper Jam
Remove paper from printer.
Press the Y button to release the paper presser, and then remove the paper.
Epson Stylus Pro 4900/4910 User's Guide
Problem Solver
132