Epson Stylus Pro 4900 - Page 87

C
Click Roll Paper Option, and then select
Normal Cut or Off from the Auto Cut list.
D
Click User Defined and match the paper size to
the size of the data if necessary.
Tip:
If you are using applications that support banner
printing, you do not need to set User Defined Paper
Size if you select Roll Paper (Banner) as the
Source.
E
Click the Page Layout tab, and select Reduce/
Enlarge, and then select Fit to Page or Fit to Roll
Paper Width.
Tip:
If you are using applications that support banner
printing, you do not need to set Reduce/Enlarge if
you select Roll Paper (Banner) as the Source.
F
Select the size of the data created by the
application from the Page Size list, and select the
roll paper width loaded in the printer for the Roll
Width or Output Paper.
Tip:
Settings in applications that support banner
printing are ignored.
G
Make sure the Optimize Enlargement check box
is selected.
H
Check other settings, and then start printing.
Epson Stylus Pro 4900/4910 User's Guide
Printing Varieties
87