Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT SpectroProofer Related Adjustments 407
Confidential
PF Direction Color Measurement Check
1. Load paper.
2. Select PF Direction Color Measurement Check.
3. Click [Run].
Print the pattern and calibration automatically and the result will be displayed.
The result is OK: Go to Step 5
The result is NG: Go to Step 4
4. Check if the Color Measurement Device is mounted correctly. Return to Step
2.
5. Click [Finish].
6. Turn the printer OFF and finish the adjustment.
Figure 4-113. Print Pattern
To Next Page
Loading...
