The Control Panel 163
Details of Menu mode
PRINTER SETUP
This menu contains the following items.
ROLL PAPER COUNTER
You can get a message when there is not much paper left, by
setting the roll alert.
When using roll paper, enter the length of roll paper set in the
printer and the alert value. You can set the roll paper length from
5.0 to 99.5 m, and the roll length alert from 1 to 15 m.
Note:
This setting is available only when you select ROLL for REMAINING
PPR SETUP in Maintenance mode. See “REMAINING PPR SETUP”
on page 197 for details.
PLATEN GAP
You can adjust the distance between the print head and paper.
Normally, leave this set to STANDARD. If you find that printed
images are smeared, select WIDE or WIDER. Select NARROW for
printing on thin paper, or WIDEST for printing on thick paper.
To Next Page
Loading...
