EasyManua.ls Logo

Epson Stylus Pro 7450 - Chapter 6 Maintenance and Transportation; Replacing Ink Cartridges

Epson Stylus Pro 7450
373 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance and Transportation 245
Chapter 6
Maintenance and Transportation
Replacing Ink Cartridges
When the printer’s Ink check light is flashing, this indicates that
the ink is low and you need to obtain a replacement ink cartridge.
When the Ink check light remains on, this indicates that you need
to replace the expended ink cartridge. The LCD panel also
displays INK LOW or INK OUT.
Note:
Even if only one ink cartridge is expended, the printer cannot continue
to print.
Epson recommends the use of genuine Epson ink cartridges.
Other products not manufactured by Epson may cause damage
to your printer not covered by Epson’s warranties. For detailed
information on ink cartridges, see “Ink cartridges” on page 356.
To check the product codes of ink cartridges, see “Consumable
Products” on page 363.
To replace an ink cartridge, follow the steps below.
c
Caution:
Leave the old ink cartridge installed in the printer until you are
ready to replace it with a new one.
1. Make sure the printer is on. Find out which cartridge needs
to be replaced, as indicated by the steady or flashing the Ink
check light and the target ink icon.

Table of Contents

Other manuals for Epson Stylus Pro 7450

Related product manuals