2-8
Printing and Printer Management
R4C6020
Rev. 1
A5 size MANAG.FM
7/12/01 Pass 0
L
Proof Sign-off:
DAI A. Kobayashi K. Araki
K. Nishi
DAI K. Ramsey
6. Pull the paper down a small way through the paper insertion
slot.
Note:
If the bottom edge of the paper does not come out below the lower
cover, open the lower cover by pulling down on the handles, then
pull the paper through.
7. Holding the bottom edge of the paper, roll back the roll paper
using the flange on the right to remove the slack. Make sure
that the bottom edge of the paper is straight and in line with
the rows of punch holes.
To Next Page
Loading...
