Epson Stylus Pro 7500 - Page 15

EPSON Stylus Pro 7500 Revision A
Product Description Print Specifications 15
• Paper Width: Paper length = 297 ~ 728 mm...
0.08 ~ 1.5 mm
Paper Length = 728 ~ 915 mm (36”) ...
0.08 ~ 0.5 mm
*1 There should be no wrinkles, fuzz, tearing or folding, of the paper, etc.
• Paper Thickness = 0.08 ~ 0.11 mm
• Paper Weight = 64 ~ 90 gf/m
2
• Paper Quality = Plain paper, recycled paper
*1 The paper should be loaded longitudinally.
*2 There should be no wrinkles, fuzz, or tearing, of the paper, etc.
*3 This product should be used in a place with a normal room temperature environment
(Temperature: 15~25°C, Relative humidity: 40~60%).
Cut Sheet Paper: [Papers that can be loaded]
Loading of the following papers into this printer is
possible, but for papers other than the following plain
paper and exclusive paper, feed through characteristics
and print quality are not guaranteed.
• Paper Size: See the table below.
Table 1-5. Specifications of Papers which can be Loaded
Size Name
Dimensions
(H x W)
Size Name
Dimensions
(H x W)
B2 515 x 728mm ????? 22” x 36”
A4 210 x 297mm ????? 20” x 24”
Super A1 24” x 36” ????? 18” x 22”
A1 594 x 841mm ANSI D 22” x 34”
A2 420 x 594mm ANSI C 17” x 22”
Super A3 329 x 483mm ANSI B 11” x 17”
A3 297 x 420mm Letter 8.5” x 11”
[Plain Paper]
For the following specifications, only the lack of
hindrance for paper feed through is guaranteed.
• Paper Size: See the table below.
Table 1-6. Specifications of Papers which can be Loaded
Size Name
Dimensions
(H x W)
Size Name
Dimensions
(H x W)
B2 515 x 728mm ????? 22” x 36”
A4 210 x 297mm ????? 20” x 24”
Super A1 24” x 36” ????? 18” x 22”
A1 594 x 841mm ANSI D 22” x 34”
A2 420 x 594mm ANSI C 17” x 22”
Super A3 329 x 483mm ANSI B 11” x 17”
A3 297 x 420mm Letter 8.5” x 11”