Epson Stylus Pro 7500 - Clean Head (Drain Ink)

EPSON Stylus Pro 7500 Revision A
Adjustment Adjustment Steps 209
CLEAN HEAD (DRAIN INK)
This function allows you to drain the ink from the ink delivery system including the
printheads. Perform the Clean Head function before moving the printer.
Figure 5-40. Ink Drain Operation
CAUTION
n Print out the “Nozzle Check Pattern” in advance, then check the
waste ink pad’s condition (remaining life [%]). If you judge that
the remaining capacity is low, after cleaning is done, it should be
replaced with a new one. The remaining capacity will drop by
approximately 10% from this cleaning operation.
n For the “Cleaning tool”, be sure to use the cleaning fluid
cartridge (x 6 cartridges) specified by EPSON.
n After discharging ink, at the point when the necessary operation
is completed, be sure to carry out “Initial Filling.”