Epson Stylus Pro 7500 - Page 43

EPSON Stylus Pro 7500 Revision A
Product Description Panel Setting Menu 43
If the PF motor is replaced, clear the counter in Maintenance Mode 2.
*6:Calculation Method: The total number of dots sprayed is summed for each color, then the
head unit’s life is calculated as the guaranteed number of dots sprayed per nozzle x 61 nozzles
and the maximum number of cumulative dots in each color is calculated. (The maximum
number of guaranteed dots sprayed per nozzle is 2 x 10
9
dots, and the total is a value rounded
to 1000 dots for each page printed.
The display format is as shown below.
If you are replacing print heads B and C, clear the counter in Maintenance Mode 2.
*7:Calculation Method: The calculation method is the same as that for the waste ink count. The
cleaning unit life is virtually the same as that of the waste ink count and it is replaced at the
same time during servicing.
The display format is as shown below.
After replacing the parts provided in the Maintenance Kit Stylus Pro 7500, clear the counter in
Maintenance Mode 2.
Table 1-31. PF Motor Life Counter Display List
PF Motor Remaining Life Panel Display
100 ~ 81% remaining E ***** F
80 ~ 61% remaining E **** F
60 ~ 41% remaining E *** F
40 ~ 20% remaining E ** F
20% ~ 1% remaining E * F
Less than 1% remaining E F
Table 1-32. Head Unit Life Counter Display List
Head Unit Remaining Life Panel Display
100 ~ 81% remaining E ***** F
80 ~ 61% remaining E **** F
60 ~ 41% remaining E *** F
40 ~ 20% remaining E ** F
20% ~ 1% remaining E * F
Less than 1% remaining E F
Table 1-33. Cleaning Unit Life Counter Display List
Cleaning Unit Remaining Life Panel Display
100 ~ 81% remaining E ***** F
80 ~ 61% remaining E **** F
60 ~ 41% remaining E *** F
40 ~ 20% remaining E ** F
20% ~ 1% remaining E * F
Less than 1% remaining E F