EPSON Stylus Pro 7600/9600 Revision A
Disassembly & Assembly Summary 156
4.1.4 Disassembly Flow
Refer to Figure 4-2 when determining the disassembly flow.
C A U T I O N
This printer has been assembled with high accuracy of 1/100 mm.
Therefore, you are prohibited to disassemble the frames or some
specific parts. Permission of disassembly and assembly or removal
and installation is limited to the parts provided with a parts number
in the ASP List in Chapter 7. (If any parts other than specified are
disassembled or removed, there may be a case you can not repair
the printer except at the factory.)
To Next Page
Loading...
