Epson Stylus Pro 7600 - Removing the Panel Unit and Housing

EPSON Stylus Pro 7600/9600 Revision A
Disassembly & Assembly Removing the Panel Unit and Housing 158
4.2 Removing the Panel Unit and Housing
This sections describes the removal procedure for printer housing parts. See below for
an illustration of the housing parts.
Figure 4-3. Housing Part Diagram
4.2.1 Panel Unit (p.159)
4.2.9 Front Cover (p.170)
4.2.4 I/H Cover (p.164)
4.2.5 H Top Cover (p.165)
4.2.3 L Side Cover (p.163)
4.2.8 Roll Paper Cover (p.169)
4.2.2 R Side Cover (p.160)
Paper Set Lever
4.2.7 Paper Guide L2 (p.168)