Epson Stylus Pro 7600 - I;H Cover

EPSON Stylus Pro 7600/9600 Revision A
Disassembly & Assembly Removing the Panel Unit and Housing 164
4.2.4 I/H Cover
1. Remove the L Side Cover. (p.163)
2. Open the I/H Cover Lid.
3. Remove one black screw (M3
× 6), then remove the lever cap. (See Figure 4-13)
4. Remove two screws (CBS: M3 × 10), then remove the I/H Cover and I/H Cover Lid.
(See Figure 4-13)
Figure 4-13. I/H Cover Removal
C H E C K
P O I N T
For easy removal and installation of the I/H Cover, set the I/H
Lever in the raised (Release) position.
Release
Lock
I/H Lever
I/H Cover Lid
Lever Cap
Screws (CBS: M3×10) ×2
Black screw