Epson Stylus Pro 7600 - Paper Guide L2

EPSON Stylus Pro 7600/9600 Revision A
Disassembly & Assembly Removing the Panel Unit and Housing 168
4.2.7 Paper Guide L2
1. From the front, remove four screws (Truss: M4 × 6).
(See Figure 4-18)
2. Remove the Paper Guide L2.
Figure 4-18. Paper Guide L2 Removal
Figure 4-19. Paper Guide L2 Installation
Install the Paper Guide L2 so that all its projections are fit in the
notches of the Paper Guide L properly. (See Figure 4-19)
 Number of notches:
Stylus Pro 7600: 5
Stylus Pro 9600: 8
Screws (Truss: M4×6) ×2
Screws (Truss: M4×6) ×2
Paper Guide L
Paper Guide L2
Projection
Cushion tape
Notch