Epson Stylus Pro 7600 - Page 17

EPSON Stylus Pro 7600/9600 Revision A
Product Description Basic Specifications 17
PLAIN PAPER
Proper feeding is ensured only in the following specifications.
 Paper Size: Same as above list
 Thickness: 0.08 ~ 0.11 mm
 Weight: 64 ~ 90 gf/m
2
 Type: Plain paper, Recycle paper
NOTE 1: Paper is fed short-edge first.
2:
Paper should have no wrinkles, tears, or folds and the surface should be
smooth.
3: It is used under normal conditions (temperature 15 ~ 25°C, humidity 40 ~
60%RH)
4: 300mm, 400mm, 500mm, 600mm are supported for Europe.
5: Mechanism clips print data out of over-printable area for borderless print.
BORDERLESS PRINT WIDTH
Borderless print for right and left is assured with following paper width. *4
 Paper width
Table 1-10.
Stylus Pro 7600
Stylus Pro 9600
Japan 8”
210
mm
10” - 12” 14” - 16” - 20” - 24” 36” 44”
USA/Europe 8”
210
mm
10”
300
mm
12” 14”
400
mm
16”
500
mm
20”
600
mm
24” 36” 44”
C H E C K
P O I N T
Description of units of measure
cpi: characters per inch
dpi: dots per inch
cps: characters printed per second (at 10 cpi)
1 cps = 2.54 mm/s
ips: travel in inches per second
1 ips = 25.4 mm/s
G: Gravity
General ambient conditions:
Temperature 15
°C ~ 25°C
Humidity 40% ~ 60%