EPSON Stylus Pro 7600/9600 Revision A
Adjustment Self-diagnostic Function 221
5.2.1.3 Top Menu
The following diagnostic items are available in the self-diagnostic mode. This section
describes the diagnostic items available and transition in the top menu.
Note "*": This diagnostic item is not explained, since it is used only by testing at the
factory, not executed on the service site.
Figure 5-2. Top Menu Transition
Table 5-16. Self-diagnostic Function List
Item Description
Test Version, Control Panel, Sensor, Encoder, Fan, Record, CSIC, Actuator,
Actuator 2
Adjustment Head system adjustment, sensor position adjustment, paper feed
compensation, cutter adjustment
Cleaning Cleaning with mode specified
Print Test pattern printing, adjustment variables printing
Parameter* NVRAM initialization, updating, display
Life * Carriage motor, paper feed motor, CR+PF motor, cutter, head up and down,
head lock, cleaning, printing, comprehensive endurance, CR+PF+
discharging, comprehensive endurance 2, comprehensive endurance 3,
checking
Check:
Test?
[Paper Feed
∇
]
Check:
Adjustment?
Check:
Cleaning?
Check:
Print?
Check:
Parameter?
[Paper Feed
∆
]
Check:
Life?
[SelecType]
[Paper Feed
∆
]
[Paper Feed
∆
]
[Paper Feed
∆
]
[Paper Feed
∆
]
[Paper Feed
∆
]
[Paper Feed
∇
]
[Paper Feed
∇
]
[Paper Feed
∇
]
[Paper Feed
∇
]
[Paper Feed
∇
]
[Pause]
[Items]
To each menu
To Next Page
Loading...
