EPSON Stylus Pro 7600/9600 Revision A
Adjustment Self-diagnostic Function 229
5.2.2.8 Actuator
You can operate actuators. (See Figure 5-14)
CUTTER
The cutter is moved up and down by operating on the panel. (See Figure 5-15)
Neither pressing the [Paper Feed +] key with “UP” displayed nor pressing the
[Paper Feed -] key with “DOWN” displayed works.
Upon passage of 60 seconds with the cutter in the down position, it will
automatically move up.
5.2.2.9 Actuator 2
You can operate actuators. (See Figure 5-16)
When you try to return to the top menu of test after execution of any item of
Actuator 2, “Turn Power OFF” will be displayed.
Figure 5-14. Menu Transition of Actuator
Figure 5-15. Menu Transition of Cutter
Figure 5-16. Menu Transition of Actuator 2
Cutter :
? ?
[SelecType]
[Pause]
[Items]
[Enter] Start
Cutter :
? UP
Cutter :
? UP
Cutter :
? DOWN
Cutter Sole.
? ?
Pump Motor
? ?
[SelecType]
[Pause] [Items]
[Pause] End
[Enter]
[Enter] Start
[Paper Feed
∆
]
[Paper Feed
∇
]
[Paper Feed
∆
]
[Paper Feed
∇
]
To Next Page
Loading...
