Epson Stylus Pro 7600 - Page 277

EPSON Stylus Pro 7600/9600 Revision A
Maintenance Overview 277
Table 6-1. Stylus Pro 7600/9600 - Lives of Periodically Replaced Components and Maintenance
Print Volume
(# of sheet)
Product Life
(Specification)
Cutter Maintenance Tank Cleaning Unit CR Motor PF Motor Print Head
SPro7600/9600 SPro9600 SPro7600 SPro9600 SPro7600 SPro9600 SPro7600 SPro9600 SPro7600 SPro9600 SPro7600
1000 pages
Film media*7
2000 pages
Coated paper*7
5000 pages
5000p*1
10000 pages
8000p*1
11000p*2
18000p*2
20000 pages SPro9600
20000p
2.5Million passes*
3
50000 pages SPro7600
50000p
3.25Million
passes*
4
*5 28 Billion shots/nozzle
Warning message –
MAINTENANCE TANK
ALMOST FULL
– – – –
Error message –
MAINTENANCE TANK FULL *6
––––
MAINTENANCE
REQ
nnnn – – 0040 0002
–
0020
SERVICE REQ nnnnnnnn –– – 00000101 – –
Reset operation
(Counter cleared automatically by replacing it with new
one)
♦Counter clear
MM2: CLEAR COUNTERS
CLEANER
♦Counter clear
MM2: CLEAR COUNTERS CR
MOTOR
♦Counter clear
MM2: CLEAR COUNTERS PF
MOTOR
♦Counter clear
MM2: CLEAR COUNTERS
HEAD
Parts to be replaced
Paper cutter
(CRU)
Maintenance Tank
(CRU)
1. Pump&Cap Assy
2. Flushing Box
3. Wiper
At first SR: (& check Ink tubes/
FFC conditions)
1. CR Motor
2. Driven Pulley
At second SR:
1. CR Motor
2. Driven Pulley
3. Ink tubes
4. FFC
*(as required)
• Check the condition of loop scale
(worn, etc.)
• Check the condition of PF
Encoder (foreign matters or dust)
*(as required)
Required adjustments (Not required) (Not required) (Not required)
1. CR Belt Tension ADJ
2. Adj: Bi-D
3. Adj: Uni-D
4. Adj: Sponge Pos.
1. PF Belt Tension ADJ
2. Adj: Feed Adj.+T&B
1. Adj: Input Rank
2. INK CHARGING
3. Adj: Head Slant
4. Adj: Feed Adj.+T&B
5. Adj: Sponge Pos.
6. Adj: Bi-D
7. Adj: Uni-D