EPSON Stylus Pro 7600/9600 Revision A
Product Description Operating Panel 49
1.4.3.18 Firmware version
Firmware version is displayed as following,
Note 1: xxxx:interface controller version (4 letters)
2: N=Narrow machine: Stylus Pro 7600
W=Wide machine: Stylus Pro 9600
3: The character on the right of lower line represents Dye/Pigment mode.
P: Pigment mode, D: Dye mode
1.4.3.19 Printable pages of each ink cartridge
Printable sheets (estimation) of installed each ink cartridge are displayed.
The formula is following;
Printable sheets = ink remain after print / ink used
Note 1: Printable pages within IR command range are calculated and displayed.
2: When there is no value to be displayed, the panel displays “---”.
1.4.3.20 Ink remaining
Note 1: After ink remaining is near end, the ink remaining is displayed with % on the panel. 0%
is displayed on the panel for ink end.
2: When initial filling is done by user after the package opened, ink consumption for initial
filling is subtracted, and ink remaining of each ink cartridge is displayed as 100%. Ink
use count is started at that time. When ink cartridge is replaced, ink use is counted/
displayed according to “Ink system specifications.”
1.4.3.21 Maintenance tank count
How to calculate
Present available rate of maintenance tank is displayed.
Display
Available rate
Note : When initial filling is done by user after the package opened, maintenance tank
indicator is displayed with E*****F for 100~71% remaining and E**** F for 70~61%.
Table 1-34.
Model Display
Stylus Pro 7600 VERSION
BNxxxx P(orD)
Stylus Pro 9600 VERSION
BWxxxx P(orD)
Table 1-35.
Ink remaining Panel display Ink end LED
100 ~ 81% remaining E∗∗∗∗∗FOff
80 ~ 61% remaining E∗∗∗∗ F Off
60 ~ 41% remaining E∗∗∗ FOff
40 ~ 21% remaining E∗∗ F Off
20% ~ just before near end E∗ FOff
After near end ~ just before ink end nn% Blink
ink end 0% On
100 ~ 81% E∗∗∗∗∗F
80 ~ 61% E∗∗∗∗ F
60 ~ 41% E∗∗∗ F
40 ~ 21% E∗∗ F
20% ~ 10% E∗ F
Less than 10% remaining nn%
0% 0%
To Next Page
Loading...
