201
Selecting a set of ink cartridges
Follow the steps below to select a set of ink cartridges.
1. Make sure that READY is displayed on the LCD panel.
2. Press the SelecType button (
r) and confirm that PRINTER
SETUP is displayed on the LCD panel.
3. Press the Paper Feed button (
d) or Paper Feed button (
u)
to select MAINTENANCE.
4. Press the SelecType button (
r) and confirm that
MAINTENANCE is displayed on the LCD panel.
5. Press the Paper Feed button (
d) or Paper Feed button (
u)
to select BK INK CHANGE.
6. Press the SelecType button (
r). BK INK CHANGE is displayed
on the LCD panel.
7. Press the Enter button.
8. After SELECT INK SET is displayed on the LCD panel, a pattern
that can be selected for replacement is shown automatically,
as follows. Press the Paper Feed button (
d) or Paper Feed
button (
u) to select a set of ink cartridges, and then press the
Enter button.
Note:
If you select #1 MAT: #2 MAT or #1 PHOTO: #2 LBK, replace the
ink slots of #1 and #2.
Ink set in use Selectable set 1 Selectable set 2
PHOTO (#1 SLOT) + LBK (#2 SLOT) #1 MAT
#2 LBK
#1 MAT
#2 MAT*
MAT (#1 SLOT) + MAT (#2 SLOT) #1 MAT
#2 LBK
#1 PHOTO
#2 LBK*
MAT (#1 SLOT) + LBK (#2 SLOT) #1 PHOTO
#2 LBK
#1 MAT
#2 MAT
To Next Page
Loading...
