Epson Stylus Pro 7600 - Using the Spool Manager; Using Status Monitor 3

4-14
4-14 | Printing with EPSON Drivers for Windows
Using the Spool Manager
The Spool Manager (not available with Windows NT) displays the status of
your print job files and lets you control them.
To open the Spool Manager while you’re printing, click the
EPSON Stylus
Pro 7600/9600
icon that appears on the taskbar at the bottom of the screen.
You see the Spool Manager window:
To cancel, pause, resume, or restart a print job, click the job to highlight it;
then click the corresponding command button on the bottom of the
window.
Using Status Monitor 3
The Status Monitor 3 utility lets you check individual levels of ink in your
printer and warns you when errors occur.
You can open Status Monitor 3 either from a running application or from
the Windows Printers utility.
Print job
file
Command buttons
Printer Guide.book Page 14 Monday, April 22, 2002 3:02 PM