Epson Stylus Pro 7600 - Options and Accessories

2
2 | Introduction
Options and Accessories
Your EPSON Stylus Pro 7600 and 9600 offer these optional upgrades and
accessories:
* Designed for use with heavy media, which can damage the printer’s built-in
cutter.
Optional equipment and software
Option Part number
EPSON Stylus Pro 7600 Printer Stand C12C844061
EFI
®
Fiery
®
Spark Professional 2.0 Software RIP C842832
Internal 10/100 BaseT (Ethernet
™
) Type-B interface card C12C823912
Internal IEEE 1394 (FireWire
™
) Type-B interface card C823722
Automatic Take-Up Reel System (Stylus Pro 9600 only) C12C815251
Replacement 44-inch Take-up Reel Core
(Stylus Pro 9600 only)
C815121
Paper Roller Spindle (Normal Tension) — 2- or 3-inch
Stylus Pro 7600:
Stylus Pro 9600:
C12C811161
C12C811151
Paper Roller Spindle (High Tension) — 2- or 3-inch
Stylus Pro 7600:
Stylus Pro 9600:
C12C811155
C12C811152
Manual Media Cutting System*
Stylus Pro 7600:
Stylus Pro 9600:
C12C815231
C815182
Replacement Manual Cutting Blade (for Manual Media
Cutting System)
C815192
TIP
Check the EPSON Pro
Graphics web site at
http://prographics.epson.
com for new accessories
and options that may
become available.
Printer Guide.book Page 2 Monday, April 22, 2002 3:02 PM