49
Setting Up the Printer | 49
2. Plug the interface cable into the appropriate port on the printer.
3. Plug the other end of the cable into the appropriate connector on your
computer, or network switch or hub.
Installing the Software for Windows
Follow these steps to install the software for Windows:
1. Make sure your printer is turned off.
2. Turn on your computer.
3. Insert the printer software CD-ROM in your computer. The installer
starts automatically.
Network connection
USB connection
Note: With Windows 7 or
Vista, if you see the
AutoPlay window, click
Run Epsetup.exe. When
you see the User Account
Control screen, click Yes
or Continue.
To Next Page
Loading...
